May 10, 2021
Hint: one of the best ways to avoid common mistakes in homemade fudge is to leave fudge making up to the experts at Wockenfuss Candies!
Homemade fudge is a creamy, delicious treat. Chocolate fudge is a standard favorite, and there are countless variations and flavor combinations that bring some excitement to the world of homemade fudge. Although some recipes seem relatively straightforward, many home cooks have trouble creating the perfect fudge from scratch. In this blog, we discuss some of the most common challenges people face when making homemade fudge. Of course, one of the best ways to avoid these missteps is to leave fudge making up to the experts at Wockenfuss Candies!
Homemade Fudge Doesn’t Always Set
Traditional fudge is made by heating sugar, butter, milk, and other ingredients until the mixture reaches the soft-ball stage. Home cooks usually use a metal saucepan to do the job, with the final hot mixture spread into a casserole dish or sheet pan to cool. However, homemade fudge doesn’t always set up into a semi-firm, melt-in-your-mouth confection. If your fudge doesn’t firm up after a few hours, you either have too high an amount of liquid to sugar, or your mixture hasn’t reached the soft-ball stage. Using a candy thermometer can help home cooks avoid this problem.
Cooking in High Humidity Can Cause Problems
Just as altitude can create complications when baking, high humidity in the kitchen can lead to significant setbacks when making fudge. Humidity can cause fudge to boil over in the pan or stay soft when set, so try to avoid working on humid days if at all possible. If waiting for a less humid day isn’t feasible, you’ll need to boil your fudge at a slightly higher temperature than usual — or just order some delicious fudge from Wockenfuss!
Why Homemade Fudge Becomes Grainy
Even if your homemade fudge sets up to a nice firm consistency when cooled, you can still run into texture problems. Fudge becomes grainy and sugary when prepared incorrectly. Unfortunately, this is a common issue. To avoid grainy fudge, make sure that the sugar in your mixture dissolves entirely. This can require adjustments to your recipe or stirring technique.
How to Avoid Burning Your Fudge
As with any other confectionery endeavor, burning your fudge is a distinct possibility. Use a heavy-bottomed saucepan (some folks swear by copper pots) and stir the mixture constantly. Never leave your fudge unattended, and make sure to scrape the side of the pan as you stir. It’s hard (if not impossible) to save a burnt batch of fudge. Still, stopping by your nearest Wockenfuss Candies store is a surefire way to save the day!
A Wide Selection of Delicious Treats from Wockenfuss Candies
Head to WockenfussCandies.com and browse our wide selection of chocolates and candies; we promise you won’t be disappointed! Wockenfuss Candies is one of the oldest candy makers in Baltimore. We opened our doors in 1915 and have proudly served the people of Baltimore ever since. If you have any questions about our wide selection of chocolates, please contact Wockenfuss Candies by calling 1-800-296-4414 or email info@Wockenfusscandies.com. When you’re not savoring our sweets, stay satisfied by following us on Facebook, Twitter, and Pinterest!
This entry was posted on Monday, May 10th, 2021 at 2:21 pm.You can skip to the end and leave a response. Pinging is currently not allowed.
FAQs
As water gradually evaporates, sugar is concentrated and the temperature of the mixture rises above 100°C (212°F). If there is too much evaporation, when the cooking time is too long, there will not be enough water left in the fudge and it will be too hard.
What is the secret to smooth fudge that is not gritty? ›
Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.
What makes high quality fudge? ›
You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).
What happens if you over mix fudge? ›
Beating the cooled batter is one of the crucial steps of fudge-making, but overbeating can turn fudge hard as a rock. Pay close attention to the change in appearance and only beat the fudge until it loses its glossy sheen.
Do you stir fudge when it's boiling? ›
Know When and When NOT to Stir
Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.
What to do with failed fudge? ›
My advice to you is to just pour it in a jar, call it something else delicious, and pretend you meant for it to be that way. The nice thing about my “failed” fudge is that it tastes absolutely delicious! A spoonful of the delectable treat will make you want for more.
What does cream of tartar do in fudge? ›
Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!
What is the most common problem in making candy? ›
Not Controlling the Crystals
The main goal in candy making is to control the formation of sugar crystals. If you have a lot of sugar crystals forming on the sides of the pan, your candy will be too grainy. Always stir gently to avoid splashing the candy mixture onto the sides of the pan.
Why is my homemade hard candy sticky? ›
If there is more acid in hard candy, it will invert and become sticky. Check the acidity of the filling as well. Acids promote sucrose inversion, especially at high temperatures, and are added after cooking, along with flavorings.
How do you get to hard crack without burning it? ›
Hard-Crack Stage
Drop a little of the molten syrup in cold water and it will form hard, brittle threads that break when bent. CAUTION: To avoid burns, allow the syrup to cool in the cold water for a few moments before touching it! Toffee, nut brittles, and lollipops are all cooked to the hard-crack stage.
If the fudge is very soft and slightly chewy then it is possible that it did not quite cook to soft ball stage and next time the mixture should be cooked to a slightly higher temperature (soft ball is 112-116c/235-240F and a sugar or candy thermometer can help).
What went wrong with my fudge? ›
If your fudge is tough, hard, or grainy, then you may have made one of several mistakes: You may have overcooked it, beaten it too long, or neglected to cool it to the proper temperature.
Can I fix fudge that didn't set? ›
It sounds like your fudge simply wasn't heated enough. ... If it's overcooked (resulting in grainy fudge) or undercooked (resulting in poor setting) all you really need to do is add a bit of cream, reheat the fudge to the target temperature, and let it set again.
Why would fudge not set up? ›
The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.
How can you tell if fudge is bad? ›
If fudge experiences a change in temperature, it can melt or develop a slimy texture on the surface. If it is exposed to air, it can dry out and become hard. Specific add-ins to fudge have the potential to grow mold or give off a bad odor, and at that point, the fudge should be avoided.
Was fudge made by mistake? ›
That appetite for fudge dates back more than a century. Food historian Joyce White says fudge is based on a recipe for chocolate caramels, which was very similar. "What probably happened is that there was someone in Baltimore, messed it up, or 'fadged' it," she said. "Fadge is a word that means you messed up.
