Three ways to trellis tomatoes (2024)

  1. Home
  2. Yard and garden
  3. Yard and Garden News
  4. Three ways to trellis tomatoes

Now is the time to trellis and prune your tomatoes. A trellis is simply a support system for your tomato plants to keep them off the ground and promote good air circulation. Trellising is important because it supports strong stems, prevents disease issues, and allows for easier access to fruit. We'll look at three different ways to support your plants.

No matter which method you use, make sure to prune your plants throughout the early summer. Removing the bottom leaves helps to prevent pathogens in the soil from splashing up onto the leaves. Removing suckers (the little leafy shoots above each stem), helps the plant to direct its energy into growing strong leaves and stems that can support more fruit.

#1 Tomato cages

Buying individual tomato cages is perhaps the lowest effort, but most expensive option for trellising your tomatoes, especially if you grow many plants each year. These cages are easy to find at your local hardware or garden store, and come in a variety of sizes and colors.

In general, get the largest and sturdiest cages possible, as tomatoes almost always grow out of these cages. The exception is dwarf tomatoes bred for pots; these can usually be supported with smaller cages.

Pros:

  • Neat appearance in the garden, colorful cages can add aesthetic appeal.
  • Easy to use.

Cons:

  • More expensive than other methods.
  • Cages often don’t provide enough support. Young plants can flop inside of them, resulting in weak or broken stems.
  • They require regular upkeep; if stems grow in the wrong direction, they can break as you try to wrestle them back into the cage.
  • They are often not large enough to support tomato plants, especially indeterminate plants, which grow very tall.

#2 A single post

There are so many posts and sticks available at garden centers, it can be hard to know what to choose. A single post support system is a simple and effective way to grow tomatoes.

As the plant grows, you can use a variety of materials like string, tomato tape, or plant clips to attach the growing stem to the stick, keeping it upright and supported. If you plan to use individual posts to support your plants, here are a few things to consider:

  • Make sure it can hold the weight of the plant. A single bamboo post is not likely to support the weight of a mature tomato plant. Opt for heavier duty materials like steel t-posts or hard plastic garden posts.
  • Use a post with the proper height. If you’re growing determinate tomatoes, they should not get much taller than 4-5 feet. But many of the tomato varieties we love to eat are indeterminate, meaning they will continue to grow taller throughout the season. If you’re growing indeterminate varieties, use the tallest posts you can find.
  • If you’re going to use the same posts year after year, opt for a material that can be cleaned and sanitized; this is better for disease management. Basically, this means not wood. The material should have a smooth surface that can be washed to prevent diseases from carrying over from year to year on the post.

#3 The basketweave

For gardeners who like to grow a lot of tomatoes, the basketweave system is a great alternative to individually supporting each plant. This system is sometimes referred to as the Florida weave.

With the basketweave system, a strong post (a steel t-post or sometimes a wooden trellis system) is set into the ground between every 3-5 plants. Rather than attaching the plants directly to the post, a string is tied to the post, then weaved through the plants.

As the plant grows, you continue to add more strings, switching sides of the plant with each layer. As with the post system, it’s important to use posts that are the right height for your plants.

Pros:

  • This system can support multiple tomatoes, requiring less infrastructure / investment in equipment.
  • It can be easier to catch up with trellising if you fall behind when using this system since the weave provides more flexible support.

Cons:

  • It only works well for tomatoes grown in a straight row.

Check out this video from Louisiana State University for a tutorial: How to Florida Weave Tomatoes.

Related topics: Yard and Garden News Featured news

Page survey

Three ways to trellis tomatoes (2024)

FAQs

Three ways to trellis tomatoes? ›

From our experience, the two most effective tomato trellising techniques are using sturdy, square cages and using twine weaved between plants. We use both techniques in our garden, but for different situations. Using cages to trellis tomatoes is a great technique for several different situations.

What are the methods for trellising tomatoes? ›

From our experience, the two most effective tomato trellising techniques are using sturdy, square cages and using twine weaved between plants. We use both techniques in our garden, but for different situations. Using cages to trellis tomatoes is a great technique for several different situations.

What's the best way to support tomato plants? ›

Just drive a 6-foot redwood or cedar 2×2, a length of sturdy bamboo, or a metal T-post about a foot into the ground and plant your tomato about 6 inches away from the stake. As the vine grows, train it to a single stem by gently breaking off any side shoots that emerge from the main stem.

Is it better to cage or trellis tomatoes? ›

Using a single pole or stake to support the main stem is the best way to keep these plants upright, maintain airflow, and allow for easy access when harvesting. A piece of rebar, a metal stake, or a strong pole will work as vertical support.

What is the best method of staking tomatoes? ›

Cut lengths of natural fiber twine (heavy gauge) and tie a Bowline knot at bottom of main young tomato stems when plants begin to sprawl. Twirl the twine around the stems to top of plants in approximately 3 cycles.

What is the best string for trellising tomatoes? ›

Hanging strings made of biodegradable sisal trellis twine facilitate clean-up at the end of the plants' lifecycle. It is important not to make the knot at the base of the plant too tight, because it will cut into the plant as it grows. You can use a tomato trellis clip to attach the string instead of a knot.

How do you support tomatoes vertically? ›

We tie lengths of soft garden twine from the bar and train the tomato plants to climb them. When a plant is 18 inches tall, we tie the bottom of a string to its stem and then twist the main stem around the string as it grows. If necessary, we use small plastic tomato clips to hold the stem and the string together.

How do farmers support tomato plants? ›

Many large-scale growers use the string-weave system. Sturdy metal stakes are pounded at the ends of the row. Wooden or metal stakes are placed between every other plant. Weather-resistant sisal or nylon twine is tied at the end stake.

How high should a tomato trellis be? ›

To build the trellis, sink poles or 4-inch wooden posts into the ground about 10 feet apart. Be sure that they are deep enough and properly anchored to support the weight of all the tomatoes when laden with fruit. The tops of the posts should be 5 or 6 feet high.

What are the disadvantages of trellising tomatoes? ›

Disadvantages of Trellising:

You'll spend more time pruning and training the plants - at least some time each week. You'll harvest fewer tomatoes per plant because some pruning will be necessary. Trellised tomatoes are more susceptible to sun-scald because they get less shade from leafy growth.

How do you support tomato plants cheaply? ›

If you don't have one, you can buy some lightweight wire fencing as pictured below. These cone-shaped cages are cheap and easy to find, but can topple easily when the plants start to grow top-heavy with foliage and fruit. You're best off securing them with a heavy stake driven at least a foot deep into the soil.

Can you plant tomatoes on both sides of a trellis? ›

Even so, if intensive planting makes you nervous, you can always put just one tomato plant in the center of each side of your trellis, so two plants total per trellis.

What is the string method of staking tomatoes? ›

This is done by tying the string to the end stake and passing the string on the near side of the first plant, the far side of the second plant, and around the next stake. This process is continued to the end of the row and repeated on the return trip down the other side of the row.

How to get tomato plants to climb? ›

We tie lengths of soft garden twine from the bar and train the tomato plants to climb them. When a plant is 18 inches tall, we tie the bottom of a string to its stem and then twist the main stem around the string as it grows. If necessary, we use small plastic tomato clips to hold the stem and the string together.

References

Top Articles
Latest Posts
Article information

Author: Gov. Deandrea McKenzie

Last Updated:

Views: 5775

Rating: 4.6 / 5 (66 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Gov. Deandrea McKenzie

Birthday: 2001-01-17

Address: Suite 769 2454 Marsha Coves, Debbieton, MS 95002

Phone: +813077629322

Job: Real-Estate Executive

Hobby: Archery, Metal detecting, Kitesurfing, Genealogy, Kitesurfing, Calligraphy, Roller skating

Introduction: My name is Gov. Deandrea McKenzie, I am a spotless, clean, glamorous, sparkling, adventurous, nice, brainy person who loves writing and wants to share my knowledge and understanding with you.