How to build a pollinator garden | U.S. Fish & Wildlife Service (2024)

How to build a pollinator garden

We at the U.S. Fish and Wildlife Service know that pollinators are the engine that run healthy habitats. While we’ve been actively working to restore and conserve millions of acres of land, we need your help. Whether you have a few feet on your apartment balcony, a yard in need of landscaping or several acres, you can make a difference. Follow this easy step by step guide to build your own pollinator garden and help ensure the future is filled with pollinators.

Planning your garden

Careful planning is essential to creating a successful pollinator garden. Follow these easy steps to make sure you have everything covered before you make your investment.

Choosing your location

While flowering plants can grow in both shady and sunny locations, consider your audience. Butterflies and other pollinators like to bask in the sun and some of their favorite wildflowers grow best in full or partial sun with some protection from the wind.

Identifying soil type and sunlight

Take a look at your soil - is it sandy and well-drained or more clay-like and wet? You can turn over a test patch or check out the soil mapper for your county to learn more. Your soil type and the amount of sunlight it gets will help determine the kinds of plants you can grow.

Choosing your plants

Research which varieties of milkweed and wildflowers are native to your area and do well in your soil and sunlight conditions. Native plants are the ideal choice, because they require less maintenance and tend to be heartier. Find a nursery that specializes in native plants near you - they’ll be familiar with plants that are meant to thrive in your part of the country. It’s essential to choose plants that have not been treated with pesticides, insecticides or neonicotinoids. You’ll also want to focus on selecting perennials to ensure your plants come back each year and don’t require a lot of maintenance.

Remember to think about more than just the summer growing season. Pollinators need nectar early in the spring, throughout the summer and even into the fall. Choosing plants that bloom at different times will help you create a bright and colorful garden that both you and pollinators will love for months!

Seeds vs. plants

Once you’ve identified your plant species, you’ll need to decide whether to use seeds or start with small plants. While both are good options, your choice will depend on your timeline and budget. Seeds are more economical, especially for larger gardens, but will require more time. If you’re using seeds, plan on dispersing them the fall or late winter ahead of your summer growing season. This gives the seeds time to germinate. Nursery-started plants cost more, but will generally give you a quick return on your investment and bring pollinators into your yard during the same growing season.

Planting your garden

When you’re ready to start planting, you’ll need your seeds or plants along with essentials like gardening tools to break the soil as well as extra soil or compost and mulch.

Prepping your garden

If you’re converting an existing lawn, you’ll need to remove grass and current plant cover and turn your soil to loosen it up. If you’re planning on using raised beds or containers, there are a lot of pre-made options available, as well as simple designs to build your own. No matter where you decide to plant your garden, you’ll want to add nutrient-rich compost or soil to improve the success of your garden.

Planting your seeds or flowers

When you’re using seeds, keep in mind that they will need time to germinate, so fall and late winter are ideal times to get started. In the fall, disperse seeds and cover with soil. In the late winter, scatter seeds over the snow. The sun will heat up the seeds and help anchor them into the snow. The melted snow provides moisture that will help the seeds germinate.

If you’re starting with small plants, make sure you follow frost guidance to avoid putting your plants in too early. Dig holes just big enough for the root system, then cover and reinforce the roots with soil or compost. Add mulch to reduce weed growth.

Wait, watch, water and weed

It may take some time, but you will eventually see butterflies and other pollinators enjoying your garden. Make sure to weed and water your garden to keep it healthy. Keep in mind that it may take a couple seasons for milkweed to start producing flowers.

We wish you the best of luck with your pollinator garden. Thank you for making a difference for butterflies, bees and other pollinators!

Story Tags

Flowering plants

Habitat restoration

Indigenous species

Insects

Partnerships

Plants

Pollinators

How to build a pollinator garden | U.S. Fish & Wildlife Service (2024)

FAQs

How do you layout a pollinator garden? ›

Choose native species over cultivars when possible. Plant densely, using native groundcovers as “green mulch,” leaving some bare soil for the 70 percent of native bees that nest in the ground. Plant in drifts of 3 or more plants to be noticed by pollinators. Include mud-puddling areas for butterflies.

What makes a good pollinator garden? ›

It's essential to choose plants that have not been treated with pesticides, insecticides or neonicotinoids. You'll also want to focus on selecting perennials to ensure your plants come back each year and don't require a lot of maintenance. Remember to think about more than just the summer growing season.

What are three potential ways we could improve natural pollinator services? ›

How You Can Help Pollinators
  • Be a citizen scientist. Take part in a citizen science project that focuses on pollinators and their host plants. ...
  • Include the kids. ...
  • Plant a pollinator garden. ...
  • Be on the lookout for pollinator nesting sites. ...
  • Avoid or limit pesticide use. ...
  • More information.

What is the best mulch for pollinator gardens? ›

Crimson clover, borage, yarrow, lemon balm, and even kale can be used to create pollinator-friendly living mulches. As these plants grow, their leaves shade the soil and their roots create air and water pockets, necessary elements for good plant health.

How to prepare ground for a pollinator garden? ›

Once competing vegetation has been removed and the soil has been prepared, installation of a garden edging can keep lawn grass and other weeds from creeping into the garden for years to come. The fastest site preparation method is to remove the sod and till the soil. If needed, mow grass or existing vegetation.

How do you plant a pollinator plot? ›

Keys to a Successful Pollinator Planting

Include up to 25 percent grass species, preferably native bunch grasses. Control invasive grass species such as bromegrass, bluegrass and quackgrass with herbicides before planting. Seed no deeper than 1/4 inch into firm, weed-free seedbed. Calibrate drills and seeders.

What is the best plant for pollinators? ›

Milkweed is one of the most important pollinator-friendly plants and the sole food source for monarch butterfly larvae. The flower nectar, pollen, and leaves are food sources for a wide range of bees, wasps, hoverflies, beetles, butterflies, and moths. Learn more about growing milkweed.

What are 3 flower traits that attract a pollinator? ›

Floral Characteristics that Attract Pollinators
  • Colors. Brightly colored flowers attract pollinators, and some flowers have ultraviolet pigments that only insects such as bees can see. ...
  • Scent. The fragrance a flower emits also has an effect on pollinators. ...
  • Shape. Some flowers attract pollinators by their shape.

How big does a pollinator garden need to be? ›

A Pollinator Garden Can Vary in Size.

It can be a decorative planter with a mix of a few native flowers and annuals, a small perennial flower bed, a vegetable garden interspersed with flowers, or it can be an entire yard. Start small as you can always expand the garden later as time, budget and space allows.

What are the 3 biggest threats to pollinators? ›

Many pollinator populations are threatened by habitat degradation and fragmentation. Pollution, pesticides, pests, pathogens, and changes in land use, and climate change have all been associated with shrinking and shifting pollinator populations, particularly insect pollinators.

What are 3 steps to pollinator success? ›

Additional Tips
  1. Create areas of shade and sun that shield pollinators from the wind.
  2. Choose organic compost instead of commercial fertilizers.
  3. Avoid insecticides & pesticides!
  4. Resist the urge to disturb your newly-created pollinator garden.

What is the most common pollination strategy? ›

Flowering plants have evolved two pollination methods: 1) pollination without the involvement of organisms (abiotic), and 2) pollination mediated by animals (biotic). About 80% of all plant pollination is by animals. The remaining 20% of abiotically pollinated species is 98% by wind and 2% by water.

How can I make my garden more pollinator friendly? ›

Use a wide variety of plants that bloom from early spring into late fall. Help pollinators find and use them by planting in clumps, rather than single plants. Include plants native to your region. Natives are adapted to your local climate, soil and native pollinators.

What flowers do not like mulch? ›

Some of the worst effected plants are grassy plants (iris, daylilies, liriope, etc.), Indian Hawthorn, Azaleas and Loropetalum. Over mulching is one of the most costly and common mistake people make. Landscapers are the worst about over mulching…

Which mulch attracts less bugs? ›

Chip or bark mulch is made from cypress or cedar trees and is very helpful for repelling bugs. Both cypress and cedar contain natural chemicals and oils like thujone that deter insects. Cedar chips repel, inhibit, or kill insects like: co*ckroaches.

How much space do you need for a pollinator garden? ›

Pollinator Garden Size

The Natural Resources Conservation Service suggests an area of at least half an acre up to 2 acres for beneficial insectaries and habitat, but not many urbanites have that kind of space. They also suggest that we plant a single species in clusters of 25 square feet.

How close do pollinator trees need to be to each other? ›

In planting for pollination, a fruit tree that needs a pollinator needs it close by. A maximum distance of 100 feet is suggested, but the closer the better. Bees that carry pollen are unlikely to fly back and forth if distance between trees is greater.

How do I make my yard a pollinator habitat? ›

The 5 best ways to make your yard pollinator friendly
  1. Plant a diverse set of flowering plants. Diversifying the flowers in your garden is the best way to support the most types of pollinators. ...
  2. Add woody plants like trees and shrubs. ...
  3. Grow native plants. ...
  4. Minimize herbicide and insecticide use. ...
  5. Mow remaining lawn infrequently.
Apr 19, 2022

How do you start a pollinator pathway? ›

Identify land of highest conservation value to the community, and identify a pathway that connects these areas as well as open spaces already protected. Hold a “kick-off” event at your library or community center to announce the launch of your pollinator pathway.

References

Top Articles
Latest Posts
Article information

Author: Nathanial Hackett

Last Updated:

Views: 5803

Rating: 4.1 / 5 (72 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Nathanial Hackett

Birthday: 1997-10-09

Address: Apt. 935 264 Abshire Canyon, South Nerissachester, NM 01800

Phone: +9752624861224

Job: Forward Technology Assistant

Hobby: Listening to music, Shopping, Vacation, Baton twirling, Flower arranging, Blacksmithing, Do it yourself

Introduction: My name is Nathanial Hackett, I am a lovely, curious, smiling, lively, thoughtful, courageous, lively person who loves writing and wants to share my knowledge and understanding with you.