Candymaking Tips for Success | CraftyBaking | Formerly Baking911 (2024)

Copyright © 2000 Sarah Phillips CraftyBaking.com All rights reserved.


Candymaking Tips for Success | CraftyBaking | Formerly Baking911 (1)Candymaking is both an exact science and an art.Controlling sugar crystallizationis one of the most important aspects of its success. What determines the type of candy being made is contingent upon thetype of ingredientsused in the intial sugar solution (sugardissolved inwater); the temperature and concentration the sugar solutionis cooked to, indicated on the CANDY - SYRUP TEMPERATURE CHART; then, the degree to which it cooled and if anykneading or beatingtakes place afterwards.Ingredients added to the recipe and any stirring done during the candymaking process also has an influence.

SARAH SAYS: Increasing a candy recipe, changes the cooking time, pot size and other important factors, if not taken into account, which will adversely affect the final recipe.

See also Candymaking Problems and Solutions

1. Barometric pressure and humidity greatly affect candymaking: My advice is to never make candy on a humid day!

  • Many people dismiss the effect of relative humidity in the air because it's hard to feel or see the difference between, say 50% and 25%. But the difference is dramatic. If the relative humidity is above 35% (give or take) the breakdown of the sugar begins before it is even cold to the touch. That stickiness you feel on the surface of the hardened sugar is the same that keeps it stuck to the mold. Either a) the room should be air-conditioned and have a dehumidifier, or b) it should be a dry winter day.
  • Also, letting the sugar dry for a few hours in an air-tight container with a strong desiccant is a good idea; it absorbs the moisture. Pure blue silica gel is the best (not the weak kind you get from florist shops, which is a little bit of silica gel mixed with a lot of sand). Second best is calcium chloride. The latter is the same stuff you spread on the sidewalk in the winter to melt the ice. Just make sure it doesn't touch the sugar. Technically speaking, it's "edible", but it tastes awful! Very salty. Also, calcium chloride has a tendency to become dusty. FYI, a good source of silica gel blue in a convenient packaging is Hydrosorbent Products, Inc. The food-grade calcium chloride I mentioned is made by Dow.

2. BE CAREFUL WHEN HANDLING HOT SUGAR SYRUP: It's easy to get burned with a BIG OUCH !! Boiled sugar measures over 320 degrees F and higher. By comparison, your body temperature is at 98.6 degrees F!!

  • Not giving full-attention to the recipe. Follow the recipe EXACTLY. Make sure you can pay full attention while making the recipe. Make sure all kids and pets are out of the room because the sugar syrup is extremely hot.
  • One little speck of hot syrup splashed over the side of the pot, can burn; it's happened to me a couple of times. I have been burned by a tiny speck while sitting at a countertop in near proximity, watching someone pour hot syrup onto a marble slab; it hurt and caused a blister to form. I recommend boiling your sugar on the back burner of your stove to avoid spills and burns. Keep a container of ice water handy. If you accidentally spill hot caramel on your hand, immediately plunge it into the ice water to stop the burn.
  • Don't taste the sugar solution until cooled. It's extremely hot.
  • Use a greased wooden spoon whenever stirring the hot sugar mixture. A metal one gets too hot to handle.
  • Often time sugar syrup will bubble up and produce a lot of hot steam when adding cream, etc, which can burn you. Hold the pan away from you when doing so. Wear hot mitts that cover as much as your forearm as possible to protect yourself from the steam.
  • When adding ingredients, such as room temperature butter, toasted nuts and heavy cream (warm slightly) to the hot caramel, stand back from the pot as you will get a burst of steam when you do. Use a clean and dry wooden spoon to stir, not metal.
  • "Hold" Sugar Syrups and Caramel: As the sugar cooks, the water added to it evaporates. If you are not ready to use the sugar when it reaches the proper temperature, simply add a few tablespoons of water and allow it to continue to cook. This way you can "hold" the sugar until you are ready, but it's tricky to do.

3. Use the right tools.

4. Use proper cooking techniques.

  • Cooking the sugar too fast: While the recipe says "bring to a boil" you shouldn't just turn the burner on high, instead warm at Low-Medium until all components are dissolved/melted then turn the boiler on Medium-High until boiling begins. Then lower the temperature to about Medium to sustain a rolling boil.
  • One sign that your burner is on too high is your inability to stir the mixture before it scorches a little on the bottom. This brings small brown flakes to the top which get stirred back in. If this happens, toss the burned sugar mixture and start, again.

5. Quality and cooking time affected:

  • Not using the pan size specified in the recipe. A smaller or larger pan could affect quality and cooking time.
  • Altitude and weather also play a role.
  • Use the exact ingredients as specified in the recipe; doNOT substitute ingredients. The ingredients vary in type and amount, depending upon the candy being made, and have a specific purpose.
  • Candy recipes are not forgiving to recipe changes; candy recipes, as others, are really scientific formulas. Ingredients can differ by acidity, or texture, moisture, etc., so when exchanging one for another, you run the risk of choosing the wrong one.
  • DO NOT double the recipes, unless you are an experienced candy maker. Make separate batches until you have the desired amount. Increasing the ingredients changes the cooking time. Only do so if you have a lot of experience with the recipe.

Other Recipes

Kelly’s Garlic Oil

6452 views| 0 comments

Brownie Cookies

17445 views| 56 comments

Melon Sorbet

7976 views| 0 comments

Candymaking Tips for Success |  CraftyBaking | Formerly Baking911 (2024)

FAQs

Why is my sugar glass not hardening? ›

Keep heating and stirring your candy until it reaches 300°F (148.89°C). This is very important. If you don't get your mixture hot enough, it won't harden properly. Your candy will be soft and sticky, no matter how long you let it sit, harden, or cool.

What is the best humidity level for making candy? ›

That's part of why candy making is so prevalent in winter; the best climate for making candy has a relative humidity of less than 35%, and cold air usually has less moisture than hot air.

How to make hard candy in high humidity? ›

Because excessive softness in candy is the result of high relative humidity, you can also cook hard candies, such as peanut brittle, to 2 degrees higher than the temperature your recipe calls for.

What are the most important aspects of candy making? ›

Controlling sugar crystallization is one of the most important aspects during the Preparation of Candy - controlling the initial sugar solution or the proportion of sugar to water, concentrating the sugar syrup as its cooks, essentially filled with sugar crystals broken into individual molecules and, finally ...

Why didn't my candy harden? ›

In hard candy making, it is important to cook all the water out of the sugar/corn syrup/water mixture. If the sugar mixture is not cooked to the proper temperature (the hard-crack stage 300-310° F {149-154° C.} or if you are working in a kitchen with high humidity, chances are your candy is retaining too much moisture.

What is the water test for hard candy? ›

Each time you test the candy use a fresh bowl of cold water. If the candy forms a thin thread and does not "ball up", it is in the thread stage or 230°—235°F. This stage is similar to sugar syrup rather than candy. If the candy forms a soft pliable ball, it is in the softball stage, about 235°— 240°F.

What is 240 degrees candy stage? ›

235° F–240° F

At this temperature, sugar syrup dropped into cold water will form a soft, flexible ball. If you remove the ball from water, it will flatten like a pancake after a few moments in your hand. Fudge , pralines, and fondant are made by cooking ingredients to the soft-ball stage.

What temperature should hard candy be? ›

Without stirring, heat to 300 to 310 degrees F (149 to 154 degrees C), or until a small amount of syrup dropped into cold water forms hard, brittle threads.

Can you make hard candy on a rainy day? ›

Check out the weather forecast before making hard candy. Did you know that humidity can affect the outcome of your candy? Sugar attracts water, so rainy and humid days can hamper your attempts at making hard candy. It's best to wait for a clear and dry day.

Do you spray hard candy molds? ›

For hard candy use, all molds need to be prepared before use. Hand wash all molds in warm, soapy water and dry thoroughly. After the molds have dried, lightly spray the mold cavities with cooking spray (we recommend PAM).

How do you keep candy from sweating? ›

Wrap It Up.

Treats such as taffies, caramels, and nougats should be protected from dampness during storage. Before storing away, make sure these sweets are wrapped individually with clear cellophane.

What is the biggest factor in candy making? ›

At the heart of candy-making is sugar. The type, quantity, and crystalline structure of sugar used significantly impact a candy's taste and texture. Candy-making is a temperature-sensitive process. The way sugar is heated and cooled can result in a variety of sweets, from hard candies to gooey caramels.

What does corn syrup do in candy making? ›

Provides Smooth Texture: Corn syrup helps to create a smooth and glossy texture in candies, ensuring that they are not grainy or gritty. 3. Adds Moisture and Shine: Beyond candy making, corn syrup can be used to add moisture and a glossy finish to dessert sauces and frostings.

What does cornstarch do to candy? ›

Why do I add cornstarch? The addition of cornstarch (called cornflour in British recipes) helps give the taffy a smooth texture. Why do I add corn syrup? Corn syrup acts as an "interfering agent" in this and many other candy recipes.

Why isn't my Tanghulu hardening? ›

Incorrect Sugar Syrup Temperature

Too Low: If the syrup doesn't reach the hard crack stage (300°F to 310°F), it won't set into a hard shell. Too High: Exceeding this temperature range can cause the sugar to burn, which affects the hardening and flavor.

Is sugar still good if it hardens? ›

Hardened sugar isn't bad. It's just in need of moisture.

Can you remelt sugar glass? ›

You can crush set candy glass up and store to re-melt in oven later.

References

Top Articles
Latest Posts
Article information

Author: Jonah Leffler

Last Updated:

Views: 6172

Rating: 4.4 / 5 (65 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Jonah Leffler

Birthday: 1997-10-27

Address: 8987 Kieth Ports, Luettgenland, CT 54657-9808

Phone: +2611128251586

Job: Mining Supervisor

Hobby: Worldbuilding, Electronics, Amateur radio, Skiing, Cycling, Jogging, Taxidermy

Introduction: My name is Jonah Leffler, I am a determined, faithful, outstanding, inexpensive, cheerful, determined, smiling person who loves writing and wants to share my knowledge and understanding with you.