Best Light Cycle for Flowering Cannabis Plants | Americover (2024)

Implementing the Best Light Cycle for Flowering Cannabis Plants is essential for ensuring you yield a maximum harvest & most cannabis growers know darkness is as important as light. You may not think of the principles of yin (dark) and yang (light) when planning your light deprivation schedule, but savvy growers understand the dual needs of cannabis. And whether your greenhouse sits in the Pacific Northwest under long summer days or in the hotter climes of the Central Valley, it’s essential to balance darkness and light for a maximum bud harvest.

Contact our experienced cannabis professionals at 760-388-6294 or start a live chat.

Why is Implementing the Best Light Cycle for Flowering so Important for Cannabis Plants?

Cannabis is a photoperiodic plant that responds to seasonal changes in light. That means when the days grow shorter, the plant’s life cycle is nearing its end, and flowering occurs for reproduction. In nature, male cannabis sacs release pollen to pollinate female plants in blossom. The result is seeds, which allow the plant to produce the next generation.

As a cultivated plant, cannabis still responds to light changes. Depending upon the strain you’re working with as well as your environmental demands, your light-to-dark ratio will vary a bit. If you’re new to the strain (or growing), talk to old hands about when to end the vegetative phase and trigger your plants’ flowering phase. That timing is critical to maximizing your yield.

How Much Darkness is Needed?

Light deprivation is ideal for producing high-quality crops. A light-deprivation system helps to control exactly how much light is exposed and reap many benefits. Below are the we discuss how much darkness is needed at each stage of growth.

The Vegetative Stage of Cannabis

Cannabis in the vegetative stage (when it is growing at a rapid pace) needs at least 13 hours of light per day. In fact, indoor growers commonly use an 18/6 light to dark ratio to encourage faster growth. (Note that most indoor growers vegetate their plants 4 – 8 weeks.)

The Best Light Cycle for the Flowering Stage of Cannabis

When you are ready for your cannabis plants to flower, a 12-hours of light and 12-hours of darkness schedule is standard. Nighttime provides darkness, keeping cannabis on somewhat of a natural clock. This is why indoor growers need to make a deliberate effort to not only create long, bright days but also emulate dark cycles for cannabis to grow large full buds.

Keep to Your Chosen Schedule

If you decide on the classic 12/12 light dep schedule where you cover your plants at 7 p.m. and uncover them at 7 a.m., be consistent with that schedule. Keep in mind that this schedule requires adequate ventilation, so some growers will choose to uncover their plants at night once the sky is completely dark.

Uninterrupted Darkness

What many growers don’t realize is that the best light cycle for flowering demands an uninterrupted dark cycle. Just as your good REM sleep would be interrupted if a light popped on at 2 a.m., cannabis doesn’t fare well when any light disturbs it during its dark “sleep” cycle. The moon and stars don’t bother cannabis, but any artificial light can stop its bud growth. In fact, light interrupting its dark cycles can make cannabis so stressed and irritable that it can lead to hermaphroditism. That can pollinate females and ruin your plants.

Is there a Way to Simplify Light Deprivation?

Covering and uncovering your greenhouse on a set schedule, day in and day out can be extremely time and labor intensive. Pulling tarps is a lot of work, but using the right tools and products makes all the difference. To improve your harvest, you need to provide ample, reliable darkness for your cannabis, a good light deprivation cover and a tarp puller system will help you maintain your light deprivation schedule.

Americover’s BOLD® Black Out Light Deprivation Tarp is the top-selling greenhouse cover of its kind nationwide, consisting of two sheets of high-strength virgin polyethylene film laminated together with a third layer of molten polyethylene. The cover is scrim reinforced for superior tear resistance.

Best Light Cycle for Flowering Cannabis Plants | Americover (2)Plus, the cover can be easily set or lifted with the BOLD® EZarm Tarp Puller. The BOLD® EZarm allows one person to easily cover and uncover a greenhouse without additional help, making light deprivation so much easier.

Best Light Cycle for Flowering Cannabis Plants | Americover (2024)

FAQs

Best Light Cycle for Flowering Cannabis Plants | Americover? ›

The Best Light Cycle for the Flowering Stage of Cannabis

What is the best light cycle for the flowering stage? ›

Transitioning from the vegetative stage to the flowering stage requires a shift in the light cycle. When ready to initiate flowering, adjust the light cycle from 18/6 to 12/12.

What is the best light spectrum for flowering cannabis? ›

Red light is crucial here, as it promotes bud formation while keeping plants compact. A spectrum shift towards red, around 620-740 nm, is ideal.

What light intensity is best for flowering? ›

Most cultivators suggest increasing light intensity to 800 to 1500 µmol/m2/s PPFD during flower. Given ample space, airflow, and temperature mitigation, LED grow lights can run at full intensity during flowering.

What will make buds bigger during flowering? ›

For cannabis, the best nutrient formula for bigger buds during flowering is one that is high in phosphorus and potassium. At this stage, the plant's nitrogen needs are reduced, but the demand for phosphorus and potassium skyrockets as they are crucial in bud formation and trichome development.

What light makes a flower grow faster? ›

Blue: This is the most important light for plant growth. It is easy for chlorophyll to absorb and convert into energy. Red: As the second most important wavelength, red light is incredibly potent for plants when combined with blue light. Orange: Similar to red light, but less effective.

What is the 10 14 light cycle for flowering? ›

10/14 Light Cycle: Some growers opt for a 10 hours of light followed by 14 hours of uninterrupted darkness during the flowering stage. This light cycle can be used to encourage earlier flowering or to maximize the potential yield of certain cannabis cultivars.

How high should flowering light be cannabis? ›

During the vegetative stage, the LED grow light can be placed further away from the plant, around 18-24 inches. During the flowering stage, the light should be closer, around 12-18 inches.

What is the ideal lumens for flowering cannabis? ›

What is a lux meter for?
PhaseLux (lm/m²)
Cuttings/young plants5.000 – 10.000 lx
Growing15.000 – 50.000 lx
Flowering50.000-75.000 lx

Should I decrease light intensity during flowering? ›

Greenhouse growers use these metrics to supplement the days without sunshine. During the flowering stage, you should decrease the DLI and increase the light intensity.

Which light promotes flowering? ›

In the most basic terms: Red light promotes flowering. However, it also encourages multilevel plant growth. Too much red at the wrong time will cause your plants to stretch, which results in lower yields and lanky, unstable plants.

Which light is most effective in inducing flowering? ›

The active form, which triggers responses such as flowering, is Pfr. Red light exerts the biggest influence on photomorphogenesis (the effect of light on plant development) and far red light can sometimes reverse Pfr responses.

What color wavelength is best for flowering? ›

610-700 nm Yelllow-red light

610-700 nm is considered the optimum wavelength for chlorophyll absorption, germination and flower or bud development.

What is the secret to big buds? ›

Change Nutrients for Each Stage

The bigger the leaf area, the bigger your buds will be. Nitrogen is the nutrient needed most for this green growth. When plants reach their mature size and begin flowering, they need more phosphorus, the nutrient most essential for budding.

What fertilizer makes buds bigger? ›

Phosphorus Plus by Hesi

This mineral fertilizer brand, Hesi, has created Phosphorus Plus, a product designed to grow bigger buds and obtain amazingly thick flowers from your cannabis plants. It gives your plants an extra dose of phosphorus and potassium during the end of the flowering period.

How do you fatten up buds during flowering? ›

Light intensity

To some degree, more light translates to fatter buds and higher yields (you'll need to pay attention to the distance between your grow light and plants or your plant may suffer from light burn). Increasing light intensity is the most effective way to fatten up buds.

What is the best color light for flowering stages? ›

Red Light (600-700nm) - Flowering Fuel: Red light is the key driver of the flowering stage.

Should I increasing light during flowering? ›

During the flowering stage, you should decrease the DLI and increase the light intensity. The photoperiod should be 12 hours during the flowering stage. And 18 hours during the vegetative stage. When you increase the light intensity, your hemp plant is going to need water and nutrients.

Do LED lights reduce flowering time? ›

Faster flowering can result in significant savings and better profitability for plant breeders. Various conditions can affect the flowering speed, but the quality of the light spectrum is probably the most important.

References

Top Articles
Latest Posts
Article information

Author: Tish Haag

Last Updated:

Views: 5974

Rating: 4.7 / 5 (67 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Tish Haag

Birthday: 1999-11-18

Address: 30256 Tara Expressway, Kutchburgh, VT 92892-0078

Phone: +4215847628708

Job: Internal Consulting Engineer

Hobby: Roller skating, Roller skating, Kayaking, Flying, Graffiti, Ghost hunting, scrapbook

Introduction: My name is Tish Haag, I am a excited, delightful, curious, beautiful, agreeable, enchanting, fancy person who loves writing and wants to share my knowledge and understanding with you.